The first X4.6 MkII has completed its maiden sea trial off Haderslev, Denmark. X-Yachts’ updated 46-foot performance cruiser introduces a redesigned cockpit and mainsheet system, an S-bow and hull windows 35% larger than its predecessor’s.

X4.6 MkII under Code 0 during its first sea trial. © X-Yachts

Hull number one left Haderslev Fjord on 30 October 2026 and hoisted sail north of Årøsund in the Little Belt. The northerly breeze began at 6–8 knots, later settled at 10–12 knots and reached gusts of 14–15 knots towards the end of the day. After tacking close to the coast, the crew set the Code 0, passed Årø’s lighthouse and headed towards Funen at progressively tighter angles.

X-Yachts reports 7.4 knots upwind at a true wind angle of 38° and 8.8 knots under Code 0. Hull number one carried an Axxon carbon mast, a Furlerboom in-boom furling system and North Sails: a 3Di Ocean mainsail and jib, plus an NPL Code Zero. This is the trial boat’s configuration; the standard specification has an aluminium mast.

Mainsail trimming from the wheel

The cockpit is the principal change. The German mainsheet system now works with a redesigned traveller, while extended coamings give the helmsman a higher, supported seat when the boat heels. Both the mainsheet winch and traveller controls sit within reach of the wheel, allowing the helmsman to trim without handing over to the autopilot. The arrangement is aimed at active sailing with a small crew.

The redesigned cockpit, seen from the stern quarter.
The redesigned cockpit, seen from the stern quarter. © X-Yachts
Mainsheet controls within reach of the helm.
Mainsheet controls within reach of the helm. © X-Yachts

S-bow and more natural light

The MkII adopts the S-bow of the latest Pure X models, with an integrated bowsprit and anchor arm that can accommodate an optional larger anchor clear of the stem. Optional bow and stern thrusters have been upgraded to more powerful units with a hold function.

S-bow with integrated bowsprit and anchor arm.
S-bow with integrated bowsprit and anchor arm. © X-Yachts

Hull windows are 35% larger, bringing more daylight into the saloon, owner’s cabin and aft cabins. Below deck, the changes include additional storage in the owner’s cabin, new upholstery and side windows with integrated blinds. The standard layout provides three cabins and two heads, with a convertible split berth in the port aft cabin.

The saloon benefits from larger hull windows.
The saloon benefits from larger hull windows. © X-Yachts
The forward owner’s cabin.
The forward owner’s cabin. © X-Yachts

Epoxy construction and five boats sold

The hull uses vacuum-infused, post-cured epoxy sandwich construction. A galvanised steel frame distributes rig and keel loads, and the boat has rod standing rigging. X-Yachts puts approximately 40% of the boat’s weight in the keel.

The X4.6 MkII was presented to the public at the yard’s Haderslev open house about a week after its first sail. X-Yachts confirms five boats sold. The November 2026 base price is €607,950 excluding VAT, ex works, for the standard three-cabin version.

Explore the X4.6 MkII model page for specifications and exterior and interior galleries.

For more information, visit the official X-Yachts X4.6 MkII page.